Residents’ Quality of Life | PJCCI

Residents’ Quality of Life

The deconstruction of the original Champlain Bridge may affect the quality of life of citizens living near the work site.

This is why various preventive measures have been implemented:

  • marked transportation routes;
  • restricted travel hours;
  • expected trucking volume: about 20 trucks/day;
  • dust control (foggers, road maintenance, etc.);
  • fixed stations that measure air-quality in real time;
  • stations that measure sound levels in real time (sound-level meters).

Since April 2021, JCCBI releases monthly air quality and noise data as available depending on whether readings are required for the work activities during that month. 

Air quality

The deconstruction activities may affect air quality by generating airborne particulates from a variety of sources. The main goals of the air-quality management and monitoring plan are to:

  • track daily ambient air quality in residential areas;
  • ensure that these daily measurements in communities do not exceed standards.

Two types of monitoring are performed:

  • real-time monitoring at the edges of the construction site during activities likely to generate dust
  • ongoing air-quality monitoring from fixed stations in communities

Ongoing monitoring in communities


This monitoring is done at fixed stations set up in residential areas.

Summary of real-time measurements from fixed stations

ÎLE DES SOEURS

Number of samples:

  • January: 59
  • February: 56
  • March: 66
  • April: 62
  • May: 62

Number of times Champlain work exceeded:

  • January: 0
  • February: 0
  • March: 0
  • April: 0
  • May: 0

BROSSARD WEST

Number of samples: 

  • January: 94
  • February: 164
  • March: 199
  • April: 138
  • May: 150

Number of times Champlain work exceeded: 

  • January: 0
  • February: 0
  • March: 0
  • April: 0
  • May: 0

 

BROSSARD NORTH

Number of samples: 

  • January: 84
  • February: 82
  • March: 90
  • April: 84
  • May: 88

Number of times Champlain work exceeded: 

  • January: 0
  • February: 0
  • March: 0
  • April: 0
  • May: 0

 

BROSSARD EAST

Number of samples: 

  • January: 31
  • February: 28
  • March: 29
  • April: 30
  • May : 31

Number of times Champlain work exceeded: 

  • January: 0
  • February: 0
  • March: 0
  • April: 0
  • May: 0

 

BROSSARD SOUTH

Number of samples: 

  • January: 31
  • February: 24
  • March: 31
  • April: 27
  • May : 31

Number of times Champlain work exceeded: 

  • January: 0
  • February: 0
  • March: 0
  • April: 0
  • May: 0
If the allowable limit is exceeded
 

If a sample is above the permitted limit, work methods are quickly adjusted. Additional dust control and mitigation measures are put in place.

Sound levels

The deconstruction work may also generate noise. The main goals of the noise management and monitoring plan are to:

  • anticipate noise levels caused by upcoming work and plan the appropriate mitigation measures.
  • measure the level of noise caused by critical work and the level of noise perceived in surrounding sensitive areas.
  • compare the noise level to the performance limits established as per environmental requirements.

Identification of activities likely to generate significant noise

A noise management plan makes it possible to determine the site activities that will require noise monitoring on the site. This plan makes it possible to detail the site activities for the coming months. Subsequently, the noise for each activity is estimated taking into account several parameters: equipment, work methods and distance from sensitive areas. Thus, specialists are able to identify critical activities that require sound monitoring, that is, activities whose estimated noise is approaching 5 dBA or less than authorized limit.


Real-time monitoring
 

During an activity that is likely to generate significant noise or after a citizen complaint is received, noise readings are then taken for the duration of the activity.

The following limits must not be exceeded:

  • between 7:00 a.m. and 7:00 p.m.: The noise level must not exceed 75 dBA for ambient noise and 85 dBA or 90 dBA for impact noise.
  • between 7:00 p.m. and 11:00 p.m.: Noise limits are set at 5 dBA above the reference level* for ambient noise and at 85 dBA for impact noise.
  • between 11:00 p.m. and 7:00 a.m.: Noise limits are set at 5 dBA above the reference level* (or more than 3 dBA if the reference level is above 70 dBA). Depending on the area, this limit varies between 56 dBA and 72 dBA.

*The reference level is the ambient noise level measured in sensitive areas before the start of the work. This level varies from 51 dBA to 67 dBA, depending on the area. 

If the allowable limit is exceeded
 

If a reading is higher than the permitted limit, actions such as stopping the work and implementing additional mitigation measures will be taken before the work can continue.

When the work resumes, sound levels will continue to be checked to make sure they are below the allowable limit.
 

Identification of noise-sensitive areas


Residential areas near the work site were identified in the Targeted Environmental Analysis (TEA). For the current work, noise monitoring is being carried out during activities that are likely to generate significant noise in six areas have been identified as noise sensitive.   

The speaker icons on the maps are the sites where the reference level* has been measured in each of the sensitive areas. 

*The reference level is the ambient noise level measured in sensitive areas before the start of the work. This level varies from 51 dBA to 67 dBA, depending on the area. 

Summary of real-time measurements from fixed stations

All sound readings were correct.

SITE B3-04

Number of 30 minutes sample:  

  • January : 0
  • February: 168
  • March : 360
  • April : 480
  • May : 168

Measures exceeded: 5

  • January : 0
  • February: 0
  • March : 4
  • April : 0
  • May : 1
Go to top